Cheap Granite Work Surfaces Manchester Cheshire Lancashire Liverpool Isle Of Man Yorkshire , Cheap Silestone Work Surface

About Us
For more information on Stone Valley Work Services click below.
Here you can see a selection of our product range.

Please have the information on this page for an accurate quote.


For us to calculate you a price we will need the following information e-mailing, faxing or calling through to our office:


We will need to know what granite together with the colour or product with colour that you wish us to price the calculation on together with the material thickness as granite comes in 30mm and 20mm and quartz usually comes in 12mm, 20mm and 30mm.

Worktop measurements

Please measure the length and width of each worktop piece that you require and clearly state them on your drawing. Include any other units such as breakfast bars, island units etc. Please ensure your measurements are in millimetres mm (1m = 1000mm).

Polished Edges

These are the edges of the worktop that are visible and would need polishing. Price is based on straight edge polish with chamfer (other edge profiles available on request). Please mark each edge that needs polishing with a // symbol along the line of the front edge.

Polished Cut-Outs

Polished cut-outs are the cut outs for under-mounted sinks etc. that have the inner edges exposed and to be polished, (single hole) carried out on CNC machine.

Double Polished Cut-Outs

Double polished cut-outs are cut-outs for two under mount sinks next to each other that have the inner edges exposed and polished, (double hole) carried out on CNC machine.

Unpolished Cut-Outs

Unpolished cut-outs are the cut-outs with an inner edge that will not be visible such hobs and surface mounted sinks etc. Manual cut out (un-polished cut).

Tap Holes

These are the cut-outs for taps and switch holes, i.e. waste disposal, most tap holes are 35mm standard, if this is not the case then please consult a member of our sales team or clearly indicate it on your drawing.

Drainer Grooves (1 set = 5 Grooves)

Drainer grooves are five straight grooves (1 set) in the worktop next to the sink which act as a draining board.

Recesses Drainer

The granite is milled down and re-polished to create a drainage area running into the sink.

Up Stands

Up stands can be used instead of tiling the walls. Please measure the total length of up stands required. Price is based on 100mm high 20mm thickness. Please ensure your measurements are in millimetres, if you require anything different to the standard sizes please call our sales team or indicate it on your drawing.

Splash Backs

This is the piece of material which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splash backs which are positioned on top of the granite work surface to the underside of the wall units. If you are choosing Granite then they only come in 20mm thickness but if you choose Quartz, you can generally get them in 12mm thickness.


Please confirm the postcode of where the worktop is to be installed or delivered so we can calculate this in our price.

We are able to template, Install or deliver throughout the UK including cities like Aberdeen, Bangor, Birmingham, Bradford, Brighton And Hove, Bristol, Cambridge, Canterbury, Cardiff, Carlisle, Chester, Chichester, Coventry, Derby, Dundee, Durham, Edinburgh, Ely, Exeter, Glasgow, Gloucester, Hereford, Inverness, Kingston Upon Hill, Lancaster, Leeds, Leicester, Lichfield, Lincoln, Liverpool, London, Manchester, Newcastle Upon Tyne, Newport, Norwich, Nottingham, Oxford, Peterborough, Plymouth, Portsmouth, Preston, Ripon, Salford, Salisbury, Sheffield, Southampton, St Albans, St Davids, Sterling, Stoke On Trent, Sunderland, Swansea, Truro, Wakefield, Wells, Westminster, Winchester, Wolverhampton, Worcester and York.

google escort facebook escort konak escort alsancak escort izmir escort sex izle